There are some common issues that users often face in configuring their Edtiske extender, but most of them are resolved in basic troubleshooting. One common issue is a failure to connect with the extender’s default Wi-Fi network. To troubleshoot this, ensure the extender is plugged in, powered on, and wait for the LED indicator to become stable before attempting a connection. Another issue that could arise is when the web interface does not load after entering 192.168.188.1 in the browser. At that time, try changing your browser or clearing your cache; also, make sure you are connected to the extender's network. If the WPS fails, ensure your main router has WPS enabled, and you pressed both WPS buttons within two minutes. But the best results come from manual setup from the web interface. Finally, poor signal strength is often the result of the extended being poorly placed, half-way between the router and the area with weak Wi-Fi is what you should aim for. These quick hacks will keep your Edtiske extender setup smooth and successful.