LEDWorkLights
How to Install LED Work Lights on Your Trailer
Are you looking to add LED work lights to your trailer?
While it may not be a common practice, it is definitely possible. In this article, we will guide you through the process of connecting LED work lights to your trailer. We will also provide tips on finding the right LED work lights for your specific needs. So, let’s get started!
>>> A suggestion for you to get more necessary and deeper information, please click here best outdoor led light strips
Why Install LED Work Lights on Your Trailer?
Before we dive into the installation process, let’s understand why you might want to add LED work lights to your trailer. Keep in mind that LED work lights are not necessary for trailers and should not be used on public roads. These lights are designed to enhance visibility while working in the dark.
They serve as an additional set of lights to the standard lighting found on trailers. The standard lighting on a trailer typically includes rear lights, brake lights, indicator lights, fog lights, triangle reflectors, marker lights, and width lamps.
LED work lights, on the other hand, can provide extra illumination when you need to work on your trailer in low-light conditions.
Connecting LED Work Lights as Reverse Lights
In many cases, LED work lights on a trailer are used as reverse lights. These work lights are specifically designated with an ECE-R23 certification. If you decide to install an additional reversing light, there are a few important guidelines to follow. When using an R23 certified LED work light, make sure to position it no higher than 1.2 meters and no lower than 0.25 meters.
>>> Read more: How to Install LED Work Lights on Your Trailer
This specific angle of 30 degrees helps prevent dazzling to traffic behind you. Adding an extra reversing light can greatly improve visibility when you need to maneuver your trailer in the dark.
Overcoming LED Work Light Failures When you connect LED work lights to your trailer, you may encounter a problem where the towing vehicle fails to detect the lights. This is because LED lights require less power from the towing vehicle, causing them to go undetected.
However, there are solutions to this issue. One solution is to add a power resistor to the vehicle. This allows the lights to be recognized and ensures they work properly. Alternatively, you can opt for LED lighting that is already equipped with a standard CAN-bus proof solution. By choosing a CAN-bus solution, the vehicle will recognize the LED lighting and prevent any failures.
>>> A suggestion for you to get more necessary and deeper information, please click here led strip lights for outside house
Different Ways to Connect LED Work Lights to Your Trailer
There are several methods you can use to connect LED work lights to your trailer. Let’s explore some of the most common connections: Deutsch Connector The Deutsch connector is a popular choice for connecting work lights to a trailer. These connectors come in different lengths, up to 4 meters.
>>> Read more: Powering Your LED Lighting with Batteries: A Portable and Reliable Solution
The advantage of using a Deutsch connector is that it’s easy to connect compared to other connectors. If you need to replace a broken LED work light, it’s a straightforward process. Simply disconnect the broken light and replace it with a new LED work light. The Deutsch connectors can be easily disconnected and connected, making maintenance a breeze.
Additionally, it’s possible to connect multiple work lights to your trailer using branching Deutsch connectors.
Connecting LED work lights to a trailer using a Deutsch connector
AMP Superseal Connector If you’re looking for a waterproof solution, the AMP Superseal connector is a great choice. These connectors can withstand harsh conditions, including exposure to fuel, oil, and salt.
They are widely used in various industries, such as agriculture, machinery, and automotive. Please note that the AMP Superseal connectors are IEC529 and DIN40050 certified for water tightness, ensuring a reliable and durable connection.
Connecting LED work light to a trailer using an AMP Superseal connector
Connection Box/Distribution Box Another option for connecting LED work lights to a trailer is through a junction box. This box acts as a central hub where all the connections are linked. It’s especially useful when you want to connect multiple work lights to your trailer.
The junction box allows you to control all the lights on the trailer from a central cable connected to the towing vehicle. This centralized setup simplifies wiring and ensures effective control over your LED work lights.
By following these guidelines and choosing the right connections, you can easily install LED work lights on your trailer. Enjoy enhanced visibility and safety while working in low-light conditions. Remember, always consult a professional if you have any doubts or concerns regarding the installation process.
Stay safe and happy trailering!
>>> A suggestion for you to get more necessary and deeper information, please click here led light strips exterior
Are you looking to add LED work lights to your trailer?
While it may not be a common practice, it is definitely possible. In this article, we will guide you through the process of connecting LED work lights to your trailer. We will also provide tips on finding the right LED work lights for your specific needs. So, let’s get started!
>>> A suggestion for you to get more necessary and deeper information, please click here best outdoor led light strips
Why Install LED Work Lights on Your Trailer?
Before we dive into the installation process, let’s understand why you might want to add LED work lights to your trailer. Keep in mind that LED work lights are not necessary for trailers and should not be used on public roads. These lights are designed to enhance visibility while working in the dark.
They serve as an additional set of lights to the standard lighting found on trailers. The standard lighting on a trailer typically includes rear lights, brake lights, indicator lights, fog lights, triangle reflectors, marker lights, and width lamps.
LED work lights, on the other hand, can provide extra illumination when you need to work on your trailer in low-light conditions.
Connecting LED Work Lights as Reverse Lights
In many cases, LED work lights on a trailer are used as reverse lights. These work lights are specifically designated with an ECE-R23 certification. If you decide to install an additional reversing light, there are a few important guidelines to follow. When using an R23 certified LED work light, make sure to position it no higher than 1.2 meters and no lower than 0.25 meters.
>>> Read more: How to Install LED Work Lights on Your Trailer
This specific angle of 30 degrees helps prevent dazzling to traffic behind you. Adding an extra reversing light can greatly improve visibility when you need to maneuver your trailer in the dark.
Overcoming LED Work Light Failures When you connect LED work lights to your trailer, you may encounter a problem where the towing vehicle fails to detect the lights. This is because LED lights require less power from the towing vehicle, causing them to go undetected.
However, there are solutions to this issue. One solution is to add a power resistor to the vehicle. This allows the lights to be recognized and ensures they work properly. Alternatively, you can opt for LED lighting that is already equipped with a standard CAN-bus proof solution. By choosing a CAN-bus solution, the vehicle will recognize the LED lighting and prevent any failures.
>>> A suggestion for you to get more necessary and deeper information, please click here led strip lights for outside house
Different Ways to Connect LED Work Lights to Your Trailer
There are several methods you can use to connect LED work lights to your trailer. Let’s explore some of the most common connections: Deutsch Connector The Deutsch connector is a popular choice for connecting work lights to a trailer. These connectors come in different lengths, up to 4 meters.
>>> Read more: Powering Your LED Lighting with Batteries: A Portable and Reliable Solution
The advantage of using a Deutsch connector is that it’s easy to connect compared to other connectors. If you need to replace a broken LED work light, it’s a straightforward process. Simply disconnect the broken light and replace it with a new LED work light. The Deutsch connectors can be easily disconnected and connected, making maintenance a breeze.
Additionally, it’s possible to connect multiple work lights to your trailer using branching Deutsch connectors.
Connecting LED work lights to a trailer using a Deutsch connector
AMP Superseal Connector If you’re looking for a waterproof solution, the AMP Superseal connector is a great choice. These connectors can withstand harsh conditions, including exposure to fuel, oil, and salt.
They are widely used in various industries, such as agriculture, machinery, and automotive. Please note that the AMP Superseal connectors are IEC529 and DIN40050 certified for water tightness, ensuring a reliable and durable connection.
Connecting LED work light to a trailer using an AMP Superseal connector
Connection Box/Distribution Box Another option for connecting LED work lights to a trailer is through a junction box. This box acts as a central hub where all the connections are linked. It’s especially useful when you want to connect multiple work lights to your trailer.
The junction box allows you to control all the lights on the trailer from a central cable connected to the towing vehicle. This centralized setup simplifies wiring and ensures effective control over your LED work lights.
By following these guidelines and choosing the right connections, you can easily install LED work lights on your trailer. Enjoy enhanced visibility and safety while working in low-light conditions. Remember, always consult a professional if you have any doubts or concerns regarding the installation process.
Stay safe and happy trailering!
>>> A suggestion for you to get more necessary and deeper information, please click here led light strips exterior